 | Support Solution
|  |
|
SS-8110-Trig
WARNING: This pages contain material which can change the configuration of your scanner
or other equipment. You should not scan any barcode or follow any procedure unless you
understand the issues or have been advised by our support engineer.
How to get help
Notes
- You will need to print out the page in order to scan the barcodes.
- To avoid accidentally scanning the wrong barcode it is helpful to use
blank paper as a mask and approach the target barcode with a sideways motion.
- If you are unclear about exactly what you have to do then contact our support engineer.
We are always glad to explain and help.
Procedure
Purpose: To change the scanner trigger mode.
 |
Scan this barcode to disable the trigger. The scanner lights will be on permanently.
Scanners used in this mode will draw more power and the service life will be reduced
(LEDs on permanently will fade quicker). This mode of operation is often more
convienient for users when a high volume of barcodes are being scanned.
|
| | |
 |
Scan this barcode to revert to trigger mode operation.
This is the default mode.
The trigger needs to be pressed before scanning each barcode.
The scanner draws less power and the service life of the illuminating LEDs are maximized.
|
All material copyright www.barcodeman.com including barcode images which are tagged and watermarked
links to other related web sites:
www.abcfont.com
www.abcfont.co.uk
www.barcodemill.com
www.barcodemill.co.uk
www.barcodeman.com
www.barcodeman.co.uk
www.barcodeline.com
www.barcodeline.co.uk
www.barcodelines.com
www.barcodelines.co.uk
www.barcodeheaven.com
www.booksinstore.co.uk
www.hello.co.uk
www.altek.co.uk
www.usafirst.com
Home
